Menu
ABS eSUN Luminous filament 1,75 mm

ABS eSUN Luminous filament 1,75 mm

ABS Filament eSUN with higher strength, toughness, heat and wear resistant, is compatible with most 3D printers for a diameter of 1.75 mm. The material is available in two shades and in two weights. Lighting in the dark. Read more

Color

In stock <10pcs

16,98 €

Producer: eSUN

Description

【ABS Luminous】ABS Luminous glows in the dark. Filament with higher strength, toughness and better resistance to heat, wear and impact. The material is compatible with most 3D printers.
【Stable Dimensional Tolerance】Minimum tolerance and small shrinkage - ensure consistent feeding and stable prints, no clogging, extremely high printing success, resulting in printed parts that have excellent surface finish and are very accurate. (Depending on the printer)
【No knotting and clogging】Material with excellent roundness and very small diameter tolerance, no overlapping or tangling. It melts easily, does not crack, does not contain bubbles. Print smoothly and repeatedly without clogging the nozzle or extruder.
【Recommended printing temperature】The nozzle temperature of 220-260 °C will ensure smooth prints without frequent calibration and fewer problems with the extruder.
【Vacuum-sealed packaging】 Net weight of material : 0.5 kg. eSUN's filament comes sealed in a vacuum bag with a desiccant that keeps it dry and free of dust and foreign particles, preventing clogging of nozzles and providing smooth 3D models.

  • string diameter: 1.75 ± 0.03 mm
  • coil size: diameter 200 mm - width 38 mm - center hole 57 mm
  • pack size: 216 x 202 x 76 mm
  • weight Package: 0.9 kg
  • nozzle temperature: 220-260 ℃
  • pad temperature: 90-110 ℃
  • density: 1.04 g / cm3
  • melt Flow Index: 12 (220 ° C / 10kg) g / 10min
  • tensile strength: 43 MPa
  • extension at a quarry point: 22%
  • bend strength: 66 MPa
  • fault strength module: 2348 MPa
  • notch toughness: 19 kj / ㎡
  • deformation temperature: 78 (° C, 0.45MPA)
  • manufacturer: eSUN

More from category

Additional information

Category: ABS
Color: blue, svítící ve tmě
Weight: 0,5 kg
Average: 1,75 mm
Diameter: ± 0,03 mm
Bed temperature: 90 - 110° C
Nozzle temperature: 220-260°C
ABS eSUN Luminous filament 1,75 mm
ABS eSUN Luminous filament 1,75 mm

16,98 €

New product question

Captcha

i

Do you need advice on choosing goods?

We're here for you

+420 572 155 055 

(Mo - Th 8:00 - 15:00, Fri 8:00 - 14:00)


info@na3D.eu

Login

Forgotten password

Privacy preferences

We use cookies to improve your visit to this website, to analyze its performance and to collect data about its use. We may use third party tools and services to do so and the data collected may be passed on to partners in the EU, the US or other countries. By clicking on "Accept all cookies", you agree to this processing. You can find detailed information or adjust your preferences below.

Privacy declaration

Show details
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Login

Forgotten password

Product has been added to the cart
Continue shopping Order